The Plastics Department at Altek offers its alliance to producers of resins, compounds, pre -blend manufacturers, master batches, semi-finished plastic products and cables.
| Application | Products |
|---|---|
| Polymer Additives : PE/PP/PS Vegetable Origin | Calcium Stearate PM , PL, PLF Grade |
| Zinc Stearate PM, PT, PS Grade | |
| Magnesium Stearate; Grade PH; Grade PS | |
| SIMA 100, AntiBlock for PE | |
| Polymer Additives: PE/PP Blocking / AntiSlip Agents - Vegetable Origin | Erucamide |
| General AntiBlocking for PE based on Talc | |
| AntiBlock Silica Masterbatch | |
| Polymer Additives: PE/PP Anti Static Agent - Vegetable Origin | Glycerol Monostearate(GMS) 95 |
| ArmoStat 1000 - Fast & Short term Antistatic | |
| ArmoStat 300,400,1800 - Long term Antistatic | |
| Armostat 2000,2003- Fast & Long terms Antistatic | |
| Antistat for LDPE,HDPE, PP & other Polymers | |
| Polymer Additives: PE/EVA Anti Fogging Agents - Vegetable Origin | ArmFog 151, General Purpose AntiFog Additives for Cold & Hot Fog Food Application |
| ArmFog 500 , AntiFog for Agriculture film Application | |
| ArmFog 151- XE35, General Purpose AntiFog Additives for Cold & Hot Fog Food Application in PE & EVA | |
| Polymer Additives: PE/PP Anti Oxidants | Secondary Antioxidants (Phosphites) |
| Primary Antioxidants (Phenolics) | |
| Light Stabilizer (Useful for polymers like PP, PE, HDPE & ABS. Also used in coatings, adhesives & rubber) | |
| Antioxident for Lubricants | |
| Clarifying Agent for PP | |
| Polymer Additives: PU | Colorants for PU polyether flexible foam |
| Anti-scorching agent for low density PU flexible foam | |
| Flame Lamination agent for PU flexible foam (Low phenol grade, Phenol content < 50ppm) | |
| Special Additives：Chain extender for PU flexible foam | |
| Blowing agent | Azodicarbonamide ADC F1 |
| Azodicarbonamide F2 | |
| Catalyst | PerChloro Ethylene |
| Tetrachloroethene- Catalyst Grade | |
| Antimony Trioxide - PET | |
| Silane Coupling Agent | KBM 1003 - 'VinylTrimethoxy silane (VTMO) |
| KBM 403 -'3- Glycidoxypropyl trimethoxy silane | |
| C - Doner Silanes (cyclohexylmethyldimethoxy silane) | |
| D - Doner Silanes ('Dicyclopentyldimethoxy silane) | |
| Dispersing agents | Zinc Stearate |
| Heat Transfer Oil | Addotherm K-660 |
| Addotherm k-600 LT | |
| Impact Modifiers | Paraloid™ EXL - for Polycarbonates, PBT, Polyamides,POM, Nylon etc |
| POE - Modified By MA (For Polymaide Compund) | |
| Plastisizers | Chlorinated Paraffin Wax - CPW |
| Epoxizied Soya Bean Oil ( ESBO ) | |
| TOTM: - Tri-2-Ethylhexyl Trimellitate, non BPA | |
| DOA:- Di Octyl Adipate | |
| DINA: - Di Iso Nonyl Adipate | |
| DBM: - Di Butyl Maleate | |
| DOM: - Di (2-ethylhexyl) Maleate | |
| DOP: - Di (2-ethylhexyl) Phthalate | |
| DINP: - Di Iso Nonyl Phthalate | |
| (nDBP: - n Di Butyl Phthalate | |
| DOTP: - Di Octyl Terephthalate | |
| DPHP: - Di (2Propylheptyl Phthalate) | |
| Stablizers | Ca-Zn Stabilizer ( Powder & Pallet foam) |
| Tribasic Lead Sulphate (TBLS) | |
| Lead Oxide-Litharge (PbO) | |
| Dibasic Leads Phosphite (DBLP) | |
| Dibasic Lead Phthalate (DBLP) | |
| Lead Stearate (LS) | |
| Litharge | |
| PE WAX | |
| Nitrile Rubber | Baymod NXL 33.61 VP |
| White Pigments | Titanium Dioxide |
| Hollow Plastic Pigment | |
| Anti Oxidants | TMQ |
| Carbon Blacks | NORMAL GRADE- N 330, N550 , N660 CARBON BLACK FOR RUBBER & NON RUBBER APPLICATION |
| P GRADE ,: P353,P1201,P824 CARBON BLACK FOR FILM, PIPES, INJECTION MOULDING,HOSE PIPE ETC | |
| SPECIALITY (SP) GRADE PF401, PF402, PP801,PP802,PP803,PC501 CARBON BLACK FOR FIBER , HIGH PRESSURE PIPE | |
| CARBON BLACKS FOR CONDUCTIVE & SEMICON APPLICATION | |
| Resins | POLYSTYRENE PS HP9450 equivalent to HIP 330 |
| EVA | |
| PVC RESIN | |
| PET BOTTLE CHIPS | |
| HDPE, PP, LDPE, PP RAFFIA - ALL GRADES | |
| Wash Oil (Equivalent to Solvesso) | GaroSOL: Aromatic Solvent Naphtha |
| GaroMAX: Medium Aromatics | |
| GarLAS: Low Aromatic Solvents | |
| GaroTAR: Coal Tar & By-Products | |
| Flame Retardents | Antimony Trioxide |
| Aluminium Trihydrate - Higlite | |
| Magnesium Hydroxide | |
| Flameguard® m-082 | |
| Flameguard m-053 - One Pack FRLS Addtive | |
| Polymide | PA 6 For Cable Jacketing |
| PA 6 For Fiber And Packaging | |
| PA 6 Compound For Automobile Application | |
| PA 6.6 |